LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 65 Thursday, October 7, 2004 4:42 PM

Additional preparation

„Equipment which can output the S-VIDEO signal (Y/C signal)

Connect the equipment to an EXT terminal (but not the EXT-4 terminal).

You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN(S-VIDEO input)” on page 59.

„T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly.

•When you connect the decoder to the VCR, after you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “DECODER (EXT-2)” on page 58.

„Connecting headphones

Connect the headphones with a stereo mini- jack (3.5 mm diameter) to the headphone jack socket.

•No sound comes from the TV speakers when the headphones are connected and only one screen is displayed.

„TV output from the EXT-1 terminal

The video/sound signal of a Analogue terrestrial broadcasting channel you are viewing is always output from the EXT-1 terminal.

•Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.

•The video/sound signal from an EXT terminal cannot be output.

•Teletext programmes cannot be output.

„Connection when recording to

VCR

•When recording an Analogue terrestrial broadcasting, connect to either terminal EXT-1 or EXT-2. If you connect to the EXT-2 terminal, make sure the “DUBBING” setting (see page 60) is set to “TV”.

•Choose the EXT-2 terminal to connect to a T-V LINK compatible VCR.

When recording an Analogue terrestrial broadcasting, set the “DUBBING” setting (see page 60) to “TV”.

When recording a Digital terrestrial broadcasting (DVB-T), set the “DUBBING” setting (see page 60) to “DTV”.

„Video or sound signal output from the EXT-2 terminal

You can change over the output of the video/ sound signal from the EXT-2 terminal. This is useful when you want to dub the video/ sound from another device onto the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 60.

•The signals from EXT-4 and PC IN terminal cannot be output from EXT-2.

65