46

What is T-V LINK?

What is ACI (Automatic Channel Installation)?

PC Signals that can be displayed

Connect DVI devices

If you accidentally cut the power cord

Change the fuse in the plug

Licence

T-V LINK allows the TV to share information easily with a connected T-V LINK compatible device.
By using T-V LINK :
*Macintosh* computers are not supported.
(Macintosh is a registered trademark of
Apple Computer, Inc.)
Resolution 640 x 480 (VGA)1024 x 768 (XGA)
Vertical frequency (Hz) 60.0 60.0
Horizontal frequency (kHz) 31.5 42.0
Technical information
You can send the ATV channel information programmed on the TV to the T-V LINK compatible device, so that
both the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details,
refer to the external device's manual.
You can easily record the TV programme you are viewing on a T-V LINK compatible device by using the
"DIRECT REC" feature. For more details, refer to the external device's manual.
After timer-record setting, the TV will instruct the recorder to start and stop recording, via DIRECT REC.
Some cable companies transmit a signal called ACI which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, "ACI START/ACI CANCEL" appears in the "AUTO PROGRAM" screen.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
If the signal doesn't appear, check that the vertical
frequency on the PC is set to 60Hz.
Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-4.
Set AUDIO in HDMI SETTING to ANALOGUE or AUTO (P. 33)

Important

Fuse
Attach a new plug following the steps below. If in doubt, contact your local retailer.
Never connect to the larger terminal marked with an "E", the safety earth
symbol " " or coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured with the following code:
· Blue: Neutral wire (connect to the black terminal, or one marked "N")
· Brown: Live wire (connect to the red terminal, or one marked "L")
Open the plug as illustrated on the right.
When replacing the fuse, always use a correctly rated and approved type and
re-fi t the fuse cover when fi nished.
If in doubt, contact your local retailer.
LT-32&26DS6BJSJ.indd 46LT-32&26DS6BJSJ.indd 46 4/12/2005 3:37:47 PM4/12/2005 3:37:47 PM