Ricoh 3045 appendix Form Feed, Print Using a Selected Tray, Press Continue, 100

Other Print Operations

Form Feed

This section gives instructions for op- erating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out.

Limitation

Print Using a Selected Tray

A Select the tray for form feed from those that appear on the display panel.

❒The tray cannot be changed if the following functions are set for it:

•Staple

•Punch

4• Duplex Print to a tray that does not support duplex printing

•Cover Sheet

•Front and Back Covers

•Slip Sheet

Note

❒If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings:

•Staple

•Punch

•Duplex Print

If you want to print after adding paper to the tray, select the tray af- ter loading the correct paper.

Note

❒To load paper in the bypass tray, see p.13 “Setting Paper on the Bypass Tray”.

BPress [Continue].

The machine prints using the se- lected tray.

Note

❒If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may occur.

❒If Auto Continue is selected, form fed paper is printed after a set in- terval. See p.128 “System”.

If the machine does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the machine has run out, a caution mes- sage appears.

If this message appears, do one of the following:

100