
Installing the Printer Driver Using IEEE 1394 (SCSI print)
EInsert the
![]()
Note
❒ If Auto Run starts, click [Cancel], and then [Exit].
F G
❒To disable Auto Run, press the left {Shift}key when inserting the
|
|
Click [Browse]. | 2 |
Select the printer driver you want to use.
If the
•RPCS
D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
•PCL 5e
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1
•PCL 6
D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1
•PostScript 3
D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1
HClick [Open].
IClick [OK].
JFollow the on-screen instructions.
When installation is complete, the printer connected to “1394_00n” appears in the [Printers] window: (“n” shows the number of printers connected.)
![]()
Note
❒If the printer driver has already been installed, the printer icon is added to the [Printers] window. In this case, printer driver installation is not necessary.
❒If printing does not work properly after the installation, delete the port and reinstall the printer driver. For details, see p.151 “The Machine Does Not Print”.
❒If you do not want to install the printer when Found New Hardware Wiz- ard starts under an operating system that supports SCSI print, disable the device by following the procedure below.
A When the [Found New Hardware Wizard] dialog box appears, click [Next >].
B When the message “This wizard will complete the installation for this Device: Unknown” appears, select the [Search for a suitable driver for my device [recommended]] check box, and then click [Next >].
C When the message “Please choose your search and installation option.” appears, clear all check boxes from [Search for the best driver in these loca- tions.], and then click [Next >].
D When the message “Driver Files Search Results” appears, select the [Dis- able the device. The Add/Remove Hardware Wizard in the control Panel can be able to complete the driver installations.] check box, and then click [Finish].
47