
Using the SmartDeviceMonitor for Client Port
LIn the [Printer URL] box, enter “http://printer's address/printer” as the printer's address.
If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter “https://printer's address/printer” (Internet Explor- er 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer2 https://192.168.15.16/printer
You can enter “http://printer's address/ipp” as the printer's address.
M Enter a name for identifying the printer in [IPP Port Name]. Use a name dif- ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be- comes the IPP port name.
NClick [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O P Q
Click [OK].
Check that the port of the selected printer is displayed in [Port:].
Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check the number of sheets each user prints. For details, see SmartDeviceMonitor for Admin Help.
Up to 8 numeric characters can be entered. No alphabetic characters or sym- bols can be entered.
R S
Select the [Default Printer] check box to configure the printer as default.
Click [Continue].
Installation starts.
T Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer to complete installation.
![]()
Note
❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.
![]()
Reference
A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.53 “If a Message Appears during Installation”.
27