Ricoh 3045 appendix 158

Appendix

Problem	Causes and Solutions
No transmission	Check using the following procedure:
when using 1394 in-	A Confirm the IEEE 1394 interface cable is connected securely.
terface connection	B Restart the computer.
	If the error occurs even after executing the above operation, proceed to
	the following steps.
	C Unplug the IEEE 1394 interface cable connected to the computer.
	D Run the utility tool for the IEEE 1394 interface board, which is stored in
	the following path on the CD-ROM “Printer Drivers and Utilities”:
	\UTILITY\1394\

	Reference
	For more information about using the utility tool for IEEE 1394, see
	the README file in the same directory on the CD-ROM.
	E Restart the computer.
When connecting	Check that USB Printing Support is installed on your computer.
the machine using	Reference
USB 2.0, the first
page of a print job	See p.38 “Installing the Printer Driver Using USB”.
that contains a
large volume of
data is printed,
but the remaining
pages are not.

Note

❒If the problem cannot be solved, contact your sales or service representative.

8

158