
Preparing the Machine
HSelect the [Printer Name] check box to select the printer models you want to use. The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.
2J Click [Port:], and then click [Add].
K Click [Network Printer], and then click [OK].
L
[Browse for Printer] window.
M Select the printer you want to use, and then click [OK].
N Check that the port of the selected printer is displayed in [Port:].
O Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver in- stallation. For information about user code, see the printer driver Help.
P Q
Select the [Default Printer] check box to configure the printer as default.
Click [Continue].
The printer driver installation starts.
R Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer to complete installation.
![]()
Reference
A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See p.53 “If a Message Appears during Installation”.
34