Ricoh 3045 Connecting to the Ethernet Interface, Turn on the main power switch, Indicator green

Getting Started

E Turn on the computer.	B Turn off the main power switch.
Note	Important

❒When using Windows 95 / 98 / Me

	/ 2000 / XP and Windows Server
1
	2003, a printer driver installation

screen might appear when the computer is turned on. If this hap- pens, click [Cancel] on the screen. For more information, see p.17 “Preparing the Machine”.

The machine and computer are now connected. The printer driver must be installed next. For infor- mation about how to install the printer driver, see p.17 “Preparing the Machine”.

Connecting to the Ethernet

Interface

The network interface board supports

10BASE-T or 100 BASE-TX connec- tions.

Important

❒Before making the connection, touch the metallic part to ground yourself.

A Attach the supplied ferrite core to the end of the Ethernet cable.

❒Make sure the main power is off. See “Turning On the Power”, General Settings Guide.

C Connect the Ethernet cable to the 10 BASE-T / 100 BASE-TX port.

AJL019S

D Turn on the main power switch.

AJM005S

1.Indicator (green)

Remains green when the machine is properly connected to the network.

2.Indicator (yellow)

Turns yellow when 100 BASE-TX is operating. Turns off when 10 BASE-T is operating.

AJL014S

12