Ricoh 3045 appendix Other Printing Problems, 154

Appendix

Other Printing Problems

	Problem	Causes and Solutions
	The print on the en-	If the [Toner Saving] check box is selected in the printer driver settings, the
	tire page is faded.	entire page will be faded when printed.
		For the RPCS printer driver, [Toner saving] is located on the [Print Quality]
		tab. For the PostScript 3 printer driver, see PostScript 3 Supplement.
		See the printer driver Help.
	Print is smudges.	Settings for thick paper have not been made when printing on thick paper
		in the bypass tray.
		• PCL 6/5e and PostScript 3
		Select [Thick] in the [Type:] list on the [Paper] tab.
		• RPCS
		Select [Thick] in the [Paper type:] list on the [Print Settings] tab.
	When printing	If the printer driver is configured to use the graphics command, the graph-
	graphics, the out-	ics command from the machine is used to print.
	put and the screen	If you want to print accurately, set the printer driver to print without using
	are different.
		the graphics command.
		See the printer driver Help.
	Page layout is not	Print areas differ depending on machine used. Information that fits on a sin-
	as expected.	gle page on one machine may not fit on a single page of another machine.
		Adjust the [Printable area:] setting in the [Printer Configuration...] dialog box
		on the [Print Settings] tab in the RPCS printer driver.
		See the printer driver Help.
	Duplex printing is	• Duplex printing cannot be done with paper set in the bypass tray.
8
	malfunctioning.	When using duplex printing, make settings to use paper from a tray
		other than the bypass tray.
		• Duplex printing cannot be done with thick paper, OHP transparencies,
		or labels specified as the paper type. Specify another paper type.
		• Duplex printing cannot be done with a tray for which [1 Sided Copy] has
		been specified as Paper Type on the System Settings menu. Change the
		Paper Type setting for the tray to [2 Sided Copy] on the System Settings
		menu. See General Settings Guide.

154