Ricoh 3045 appendix Follow the on-screen instructions

Installing the Printer Driver Using IEEE 1394 (SCSI print)

E Specify the location where the source files of the printer driver is stored, and then click [Next >].

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

•RPCS

D:\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1

• PCL 5e
	2
D:\DRIVERS\PCL5E\WIN2K_XP\(Language)\DISK1

•PCL 6

D:\DRIVERS\PCL6\WIN2K_XP\(Language)\DISK1

•PostScript 3

D:\DRIVERS\PS3\WIN2K_XP\(Language)\DISK1

When installation is complete, the printer connected to “1394_00n” appears in the [Printers and Faxes] window. (“n” shows the number of printers connected.)

FFollow the on-screen instructions.

Note

❒If the printer driver has already been installed, the printer icon is added to the [Printers and Faxes] window. In this case, printer driver installation is not necessary.

❒Even if the printer driver is already installed, the message “Found New Hardware Wizard” may appear when the machine is connected to the computer using the IEEE 1394 interface cable for the first time. In that case, install the printer driver.

❒If printing does not work properly after the installation, delete the port and reinstall the printer driver. For details, see p.151 “The Machine Does Not Print”.

❒If you do not want to install the printer when Found New Hardware Wiz- ard starts under an operating system that supports SCSI print, disable the device by following the procedure below:

A When the [Found New Hardware Wizard] dialog box appears, check that

[This wizard helps you install software for: Unknown] is displayed, select the [Install from a list on specific location (Advanced)] check box, and then click [Next >].

B When the message “Please choose your search and installation option.” appears, clear all check boxes from [Search for the best driver in these loca- tions.], and then click [Next >].

C When the message “The wizard could not find the software on your computer for..” appears, click [OK].

D When the message “Cannot Install this Hardware” appears, select the

[Don't prompt again to install the software] check box, and then click [Finish].

49