Ricoh 3045 appendix Setting Custom Size Paper

Setting Paper on the Bypass Tray

Reference

For printer driver settings, see the printer driver Help.

APress the {User Tools/Counter}key on the control panel.

ZCAS100N

BPress [System Settings].

CPress the [Tray Paper Settings] tab.

D Press [TNext] to scroll through the list.

EPress [Printer Bypass Paper Size].

F Select the paper size.

Note

❒Press [UPrevious] or [TNext] to scroll through the list.

❒When loading thick paper or OHP transparencies, select paper size and paper type. For details, see p.16 “Setting Thick Paper or OHP Trans- parencies”.

GPress [OK].

HPress the {User Tools/Counter}key.

Setting Custom Size Paper

Note	1
❒ The following procedures are not

required if you select [Driver / Com- mand] from [Bypass Tray Setting Pri- ority] in [System] of [Printer Features] (see p.128 “System”). In that case, set the paper size using the printer driver.

❒If you select [Machine Settings] from

[Bypass Tray Setting Priority] in [Sys- tem] of [Printer Features] (see p.128 “System”), the settings made using the control panel have priority over the printer driver settings.

❒If the printer driver is not used, se- lect [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 “Sys- tem””). Set paper size using the control panel.

Reference

For printer driver settings, see the printer driver Help.

A Press the {User Tools/Counter} key on the control panel.

BPress [System Settings].

CPress the [Tray Paper Settings] tab.

DPress [TNext] to scroll through the list.

EPress [Printer Bypass Paper Size].

FPress [Custom Size].

If a custom size is already set, press [Change Size].

GPress [Vertical].

15