Preparing the Machine
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client set- tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
Windows 95 / 98:
2A Open the [Printers] window from the [Start] menu.
B In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].
C Click the [Details] tab, and then click [Port Settings]. The [Port Settings] dialog box appears.
Windows 2000 / Windows NT 4.0:
A Open [Printers] window from [Start] menu.
B In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties].
C On the [Ports] tab, click [Configure Port]. The [Port Settings] dialog box appears.
Windows XP, Windows Server 2003:
A Open the [Printers and Faxes] window from the [Start] menu. The [Printers and Faxes] window appears.
B Click the icon of the machine you want to use. On the [File] menu, click [Properties]. The printer properties appear.
C Click the [Ports] tab, and then click [Configure Port]. The [Port Configuration] dialog box appears.
•For TCP/IP, timeout setting can be configured.
Note
❒If no settings on the [Recovery/Parallel Printing] tab are available, follow the procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B Start SmartDeviceMonitor for Client, and then
C Click [Extended Features Settings], and then select the [Set Recovery/Par- allel Printing for each port] check box.
D Click [OK] to close the [Extended Features Settings] dialog box.
•User, proxy, and timeout settings can be configured for IPP.
Reference
For information about these settings, see “Using SmartDeviceMonitor for Client”, Network Guide, or SmartDeviceMonitor for Client Help.
28
