Ricoh 3045 appendix Open the bypass tray, Adjust the paper guides to the pa- per size

Getting Started

A Open the bypass tray.

1

AJL006S

BAdjust the paper guides to the pa- per size.

Open out the extender to support

paper sizes larger than A4 L, 81/2 υ11 L.

Important

❒If the paper guides are not flush against the paper, skewing and misfeeds might occur.

AJL007S

1.Extender

2.Paper guides

C Gently insert paper face up into the bypass tray until the beeper sounds.

Note

❒The beeper will not sound if it is turned off. Gently insert paper until it stops.

❒Do not stack paper over the lim- it mark, otherwise a skewed im- age or misfeeds might occur.

❒Fan the paper to get air between the sheets to avoid a multi-sheet feed.

D Select the paper size.

Note

❒The following procedures are not required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 “Sys- tem”). In that case, set the paper size using the printer driver.

❒If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features]

(see p.128 “System”), the set- tings made using the control panel have priority over the printer driver settings.

❒If the printer driver is not used, select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see p.128 “System”). Set paper size using the control panel.

14