Ricoh 3045 appendix 119

Printing with the Finisher

❒Staple printing will be canceled under the following conditions:

•If the number of staple jobs exceeds maximum. For information about the maximum number, see “Specifications”, General Settings Guide.

•If a paper size that cannot be stapled is selected. For information about pa- per sizes that can be stapled, see “Specifications”, General Settings Guide.

•If positions other than those fixed for stapling are specified.

•If there are inconsistencies between the orientation in the duplex mode and the staple position.

•If paper sizes are mixed when a different paper size is specified during a print job.

•When staples have run out.

•When feeding paper from the bypass tray.

• When staples have run out and Auto Continue is set, printing will continue	4
without stapling after the message has been displayed.

❒When using the optional 2 Tray Finisher or Booklet Finisher, following paper sizes can be stapled using the Mixed Size mode:

•A3 L and A4 K

•B4 L and B5 K

•11 υ 17 L and 8 1/2 υ 11 K

119