Ricoh 3045 appendix DRIVERS\USBPRINT\WIN98ME

Click [Next >].

Turn on the power of the computer.

C

D

E Click [Search for the best driver for your device. [Recommended]], and then click [Next >].

Preparing the Machine

Installing the Printer Driver Using USB

This section explains how to install printer drivers using USB.

Before installing, check that only the operating system is running on the compu- ter and no print jobs are in progress.

The printer drivers can be installed from the supplied CD-ROM provided with this machine.

Windows 98 SE / Me - USB

Important

❒ Installation via USB is not possible under Windows 95 / 98. Upgrade to Win- dows 98 SE / Me.

When USB is first used, the plug and play function starts and the [New Hardware Found], [Device Driver Wizard], or [Add New Hardware Wizard] dialog box appears, de- pending on the operating system.

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB” port is added to the [Printers] window.

A Turn off the power of the machine.

B Connect the machine to the computer using the USB cable. Connect the USB cable firmly.

2

38

FSelect the [Specify a location:] check box, and then click [Browse...]. The [Browse for Folder] dialog box appears.

GInsert the CD-ROM into the CD-ROM drive.

Note

❒When Auto Run starts, click [Exit].

❒To disable Auto Run, press the {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

H Specify the location where USB Printing Support is located, and then click [Next >].

If the CD-ROM drive is D, the source files of USB Printing Support are stored in the following location:

D:\DRIVERS\USBPRINT\WIN98ME