Troubleshooting (continued)
Problem | Actions | page |
Problem
Actions
page
HDMI
Functions
message Error
Wrong screen size
No picture, no sound
No sound
Green and distorted screen
Some inputs cannot be selected in the
“Feature Not Available”
“ACI Error”
“No Recording”
“No Recording
Possible”
“No Recording Media Problem”
“No Recording Device Busy”
Switch “Size” in “HDMI Setting” to “1” or “2”. |
| 36 | ||
|
|
|
| – |
|
|
|
| |
|
| |||
Use the cable marked with HDMI logo. |
|
|
| |
Check if the device is compliant with HDMI. |
| – | ||
| ||||
| ||||
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for |
| 36 | ||
HDMI devices, or “Analogue” or “Auto” for DVI devices. |
|
| ||
(Not available for |
|
| ||
Wait a little for the signal to stabilize when switching the |
| – | ||
| ||||
| ||||
signal format for an “HDMI” device. |
| |||
|
| |||
|
|
|
|
|
Digital channels,
cannot be selected in the | – | |
RGB input signal of | ||
| ||
|
Is the | 56 | |
Is the SCART CABLE “Fully Wired”? | 56 | |
Is the | – | |
After confirming all the conditions above, |
| |
press “OK” button again. |
| |
Press 2 to start ACI again. | – | |
If you still receive the “ACI Error” after numerous tries, | ||
press 3 to cancel ACI. |
| |
A problem occurs at the recorder. | – | |
The displayed video cannot be recorded. | – | |
The recorder is not ready for recording. | – | |
Check the videotape or DVD disc. | ||
| ||
The recorder is recording another programme, or is playing. | – |
Screen | Black or white dots |
| appear on the screen |
No picture, no sound
“Dolby Digital selected! No analogue audio available”
DTV | Forgot my PIN code! |
|
Locked channels can be watched without inputting PIN code
When JVC or the broadcasting station informs you of the software
LCD panels use fine dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time.
Please understand that this is not a malfunction.
Some digital channels cannot be watched on this TV.
When “Dolby Digital” is selected in “Digital Audio Output”, the sound of a programme containing “Dolby Digital” signals cannot be output from the TV or the audio system connected to the “AUDIO OUT” terminal.
When the channel is changed, a message will be displayed for a few seconds.
To listen with the TV or audio system
Select a language without “(Dolby)” from “Audio Selection”
Switch “Digital Audio Output” to “PCM”
The default PIN code is “0000”. If you forget the numbers that you used to change the default PIN code, first input “0081” in the “Enter PIN code” and then register a new PIN code.
Once the PIN code is input, all the lock functions (“Lock” and “Maturity Rating”) are released. If you want to use the lock function again, turn the TV off and then turn it on again.
Upgrade the tuner software by using the “Receiver Upgrade” function.
ENGLISH –
57 | IMPORTANT! |
57 | PREPARE |
| |
29 |
|
43 |
|
| USE |
41 |
|
– | SETTINGS |
| |
43 | TROUBLE? |
|
53 | 54 |