Technical information (continued)

“Dolby Digital” output from the “DIGITAL AUDIO OUT” terminal

Some digital channels are broadcasted with “Dolby Digital” signals.

In these cases, “Dolby Digital” signals can be output from the “DIGITAL AUDIO OUT” terminal.

1.Connect an audio system with a “Dolby Digital” decoder. (P. 10)

2.Change the “Digital Audio Output” setting from “PCM” to “Dolby Digital”. (P. 43)

When changing the setting, the message “Dolby Digital selected! No analogue audio available.” may be displayed for a few seconds.

Each time the channel is changed to a channel that is broadcast with “Dolby Digital” signals, the message “Dolby Digital selected! No analogue audio available.” may be displayed for a few seconds.

Even if “Dolby Digital” is set, “linear PCM” signals will be output by a channel that is not broadcast with “Dolby Digital” signals.

Set the audio system so that it is compatible with both “Dolby Digital” and “linear PCM”. (For details, refer to the audio system instruction manual.)

When you want to temporarily change the setting from “Dolby Digital” to “PCM”, change with the “Audio selection” menu (P. 29).

Set “Digital Audio Output” to “PCM” in the following cases.

The sound of a channel broadcast with “Dolby Digital” signals cannot be heard even when “Dolby Digital” is set.

When listening with the TV speakers.

When listening with an audio system that does not have a “Dolby Digital” decoder.

When listening with an audio system that is connected to the “AUDIO OUT” terminal.

When recording a programme.

If a language with “(Dolby)” is selected when “(Dolby)” is displayed in the “Audio selection” menu (P. 29), the “Digital Audio Output” setting can be temporarily changed from “PCM” to “Dolby Digital”.

A message recommending you to change the “Digital Audio Output” setting to “Dolby Digital” is displayed for a few seconds.

If you want to record a “Dolby Digital” signal using timer-record (P. 27), change the “timer-record setting” from “PCM / Analogue” to “Dolby Digital”. However, if the setting is changed to “Dolby Digital”, you cannot record analogue sound with a recording device that is connected to the EXT-2 terminal.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Digital channels that cannot be watched on this TV

If a digital channel service uses new formats (such as DVB-H or MPEG4, etc.), or MHP, it cannot be watched even though the channel name appears.

If the channel is selected, the picture will not appear and audio cannot be heard.

You can delete these channels by using the “Delete” in the “Edit PR”

“Editing digital channels” (P.47)

Specifications

Main unit

Model

LT-32DX7BSP/SSP

LT-26DX7BSP/SSP

Broadcasting systems

CCIR I / B / G / D / K / L (See “Technical information”, P. 56)

Colour systems

TV broadcast : PAL, SECAM

 

External input : PAL, SECAM, NTSC 3.58/4.43 MHz

 

 

Digital : E21-E69 (Frequency : 474 MHz-858 MHz)

Channels and frequencies

Analogue :

 

E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2,

 

R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2,

 

French cable channels (Frequency : 116-172 MHz / 220-469 MHz)

Sound-multiplex systems

NICAM (I / B / G / D / K / L), A2 (B / G / D / K)

Teletext systems

Digital : EBU TEXT

 

Analogue : FLOF (Fastext), TOP, WST (World Standard System).

 

Power requirements

AC 220 V - 240 V, 50/60 Hz

 

Audio output (Rated power output)

10 W + 10 W

 

Speakers

5.0 cm round x 2

 

Power consumption

134 W

120 W

[standby]

[0.6 W]

[0.6 W]

Screen size

80 cm

66 cm

(visible area size measured diagonally)

Dimensions (W x H x D: mm)

800 x 591.6 x 244.2

672 x 517.6 x 244.2

[without stand]

[800 x 545 x 133.5]

[672 x 471 x 133.5]

Weights

18.7 kg

15.5 kg

[without stand]

[16.3 kg]

[13.1 kg]

Accessories

(See “Check accessories”, P. 6)

 

A Conditional Access Module for watching pay-TV digital channels can be installed (P.8)

DC power can be supplied to the indoor aerial (P.56)

Terminals / Connectors

Terminal name

Terminal type

Signal type (IN)

Signal type (OUT)

 

EXT-1

Euroconnector x 1

Composite video, S-video,

TV out

 

(SCART connector)

Analogue RGB, AUDIO L / R

Input / Output

 

 

 

Euroconnector x 1

Composite video, S-video,

Dubbing out

terminals

EXT-2

(S-VIDEO out is

 

(SCART connector)

Analogue RGB, AUDIO L / R

available only for

 

 

 

 

 

 

digital channels)

 

EXT-3

RCA connectors x 3,

Composite video, S-video

 

 

S-VIDEO connector x 1

AUDIO L / R

 

 

 

 

 

 

 

Analogue component

 

 

EXT-4

RCA connectors x 5

(576i (625i) / 480i (525i),

 

 

Progressive : 576p (625p) / 480p (525p),

 

Input terminals

 

 

HD : 1080i (1125i), 720p (750p))

 

 

 

AUDIO L / R

 

 

EXT-5 (HDMI-1)

 

HDMI

 

 

 

HDMI connector x 1

(576i (625i) / 480i (525i) /

 

 

EXT-6 (HDMI-2)

576p (625p) / 480p (525p),

 

 

 

 

 

 

1080i (1125i), 720p (750p))

 

 

PC INPUT

D-SUB (15 pins) x 1

Analogue PC signal (P. 56)

 

 

AUDIO OUT

RCA connectors x 2

 

Audio L / R

 

DIGITAL

 

 

Digital audio

Output

OPTICAL connector x1

 

(48 kHz,16 bit linear

AUDIO OUT

 

terminals

 

 

PCM / Dolby Digital)

 

 

 

 

Headphone

Stereo mini-jack x 1

 

Headphone output

 

(3.5 mm in diameter)

 

 

 

 

 

We may change the design and specifications without notice.

ENGLISH

PREPARE IMPORTANT!

USE

TROUBLE? SETTINGS

57

58