JVC LT-26WX84 manual Video-1 Monitor Out, Digital-In

Initial Setup

Video-1 Monitor Out

This function allows you to set whether the signal, which comes from VIDEO-1 input terminal, should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to "ON".

Press the MENU button

†To VIDEO-1 MONITOR OUT

®To select ON or OFF

Press the MENU button to finish

INITIAL SETUP

PREVIOUS

VIDEO-1 MONITOR OUT	OFF
DIGITAL-IN	SIZE1
NEXT PAGE
SELECT OPERATE	MENU EXIT

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals:

640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the MENU button	INITIAL SETUP
† To DIGITAL-IN	PREVIOUS
	VIDEO-1 MONITOR OUT	OFF
® To enter	DIGITAL-IN	SIZE1

®To select SIZE1 or SIZE2

Press the MENU button to finish

NEXT PAGE

SELECT OPERATE MENU EXIT

Note:

The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen.

41