14
Technical information
PC Signals that can be displayed
What is “Clear SD”
Connect “DVI” devices
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
• If the signal doesnʼt appear, check that the vertical frequency on the
PC is set to “60Hz”.
Resolution 640 x 480(VGA) / 1024 x 768(XGA)
Vertical frequency (Hz) 60.0
Connect a “DVI” device to “HDMI-1” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
IN HDMI-1.
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)
• HDMI-2 input does not support analogue sound (IN HDMI-1).
• HDMI-2 input does not support DVI devices.
No use "Clear SD" Use "Clear SD"