Front Speaker (Right)
To PC/DVI
AUDIO IN
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)

Connections to other equipment

(continued)

To connect a HDMI or a DVI device to the unit

The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

To DVI output

DVI device

or

HDMI device

To HDMI out

To HDMI/DVI IN

NOTE:

• When using HDMI 1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 20). Otherwise you will only see the image with no sound.

• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

Front Speaker (Left)

Coaxial Digital

Audio Output

Coaxial digital cable (not supplied)

Subwoofer

TV/DVD

To Coaxial

 

Center Speaker

Digital Audio Input

 

 

 

Surround

Surround

AV Amplifier with built-in digital surround

Speaker (Left)

Speaker

 

(Right)

decoder as listed above

 

 

NOTE:

•When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.

36 There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.