JVC LT-32WX84 manual Auto Tuner Setup, Programming will take approximately 1 to Minutes

Quick Setup Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.

���� ����� �����

����� ���� �����

�����

������ ������� ���� ����

è To choose CABLE or AIR (or SKIP when you skip Auto Tuner Setup)

†To START

���

����������� �

��

Programming will take approximately 1 to 2

minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

•Noise muting will not work during Auto Tuner Setup.

•Skip appears only for interactive plug-in menu.

•The interactive plug-in menu setting does not appear if your TV has been turned on before. In this case, use the menu to perform these settings. See pages 38, 45 and 30.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.

����The Quick Setup is complete

22