JVC LT-37X776 manual Digital-In Audio

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p picture signal is being displayed on the screen. There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the MENU button

π† To DIGITAL-IN √® To enter

π† To select AUTO, SIZE1 or SIZE2

Press the MENU button to finish

INITIAL SETUP

PREVIOUS

VIDEO-1MONITOR OUT	OFF
DIGITAL-IN	SIZE1
DIGITAL-IN AUDIO	DIGITAL
NEXT PAGE	(1/5)
SELECT OPERATE	MENU EXIT

Notes:

•The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen.

•You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the televison will select "SIZE1" or "SIZE2" automatically.

Digital-In Audio

This feature is used if you have a DTV or HDMI compatible component connected to your TV.

Press the MENU button

π† To DIGITAL-IN AUDIO

√® To select “ANALOG”, “DIGITAL” or "AUTO"

Press the Menu button when finished

Notes:

INITIAL SETUP

PREVIOUS

VIDEO-1MONITOR OUT	OFF
DIGITAL-IN	SIZE1
DIGITAL-IN AUDIO	DIGITAL
NEXT PAGE	(1/5)
SELECT OPERATE	MENU EXIT

•If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.

•Refer to your DTV or HDMI component’s instruction manual for more information.

•When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page 71.

•When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI.

52