![](/images/new-backgrounds/1278961/27896185x1.webp)
Connecting Your Devices
Notes:
•The following connection diagrams are examples on connecting some of the most common devices to your TV. Please refer to your device’s instruction manual on other connection methods or for devices not shown here in this instruction book.
•When you are finished connecting your devices, turn on your TV and devices.
Connect an Antenna or Basic Cable
Cable or Antenna
Output
TV Rear Panel 75 Ω | INPUT 1 INPUT 2 INPUT 3 |
| |
(VHF/UHF) |
|
Notes:
•If you are able to receive ATSC (Digital terrestrial) signal, High Definition (HD) broadcasting can be watched.
•All digital broadcasting is not necessary High Definition. Check by pressing the DISPLAY button.
•Digital broadcasting is not available in all areas.
Connect a Cable Box
TV Rear Panel
Cable or Antenna | CABLE BOX |
| |
Output |
|
IN
OUT
75 Ω | INPUT 1 | INPUT 2 | INPUT 3 |
|
|
| |
(VHF/UHF) |
|
|
|
Note:
•To view channels on your cable box, make sure your TV’s channel is set to 2, 3 or 4 (depending on the area you live in).
43