JVC LVT0853-009B manual To Unload a CD, Basics of Using the CD Player - Normal Play, To Play a CD

Models: P-VSDT6 LVT0853-009B

1 32
Download 32 pages 3.42 Kb
Page 24
Image 24
Using the CD Player

Using the CD Player

To Unload a CD CAUTIONS:

DO NOT try to open or close the Panel by hands as it will be damaged. Press the OPEN/CLOSE button on the Remote Con- trol to open or close the Panel.

DO NOT try to insert another CD when a CD has been already loaded on the Unit. Doing so will damage the CDs and the Unit.

DO NOT apply any shock to the Panel when it is open.

DO NOT clean the Panel when it is open.

To Unload a CD

Press the 0 button on the Unit to eject a CD. The CD is ejected automatically, then take out the CD.

(when the Unit is placed horizontally)

(when the Unit is placed vertically)

Basics of Using the CD Player

— Normal Play

To Play a CD

1 Insert a CD.

2 Press the 3¥8 button.

The first track of the CD begins playing.

Track number

Playback time

The CD Player automatically stops when the last track of the CD has finished playing.

To stop playing the CD, press the 7 button. The following information for the CD is displayed.

Total track number

Total playback time

To stop playing and remove the CD, press the 0 but-

ton on the Unit.

To pause, press the 3¥8button. The playback time blinks on the display.

To cancel pause, press the same button again. Play con- tinues from the point where it was paused.

To Select a Track or Passage within a Track

In the stop mode or during playback, press the Number but- ton on the Remote Control to select the track you want.

The selected track starts playing.

For the track number more than 10, press the +10 button then the Number button.

OR

During playback, press the 4 or ¢ button to select the track you want.

The selected track starts playing.

Press the ¢ button once to skip to the beginning of the next track.

Press the 4 button to skip to the beginning of the track being played. Press twice quickly to skip to the beginning of the previous track.

Search Play

Holding down the 4or ¢button, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.

The < or > and Basics of Using the CD Player or To Play a CD buttons on the Remote Control operate same as the 4 or ¢ button does.

Programming the Playing Order of the Tracks

(Using the Remote Control)

You can program the playing order of the tracks.

You can program up to 32 tracks in any desired order in- cluding the same tracks.

You can only make a program when the CD Player is stopped.

1 Insert a CD.

2 Press the 3/8 button.

3 Press the 7 button to stop the CD.

4 Press the PLAY MODE button on the Remote Control until the “PROGRAM” indicator lights up.

PLAY MODE

PROGRAM

(To be continued on the next page)

21

Page 24
Image 24
JVC LVT0853-009B, P-VSDT6 To Unload a CD, Basics of Using the CD Player - Normal Play, To Play a CD, Search Play, Cautions