JVC LVT1140-004A manual Main differences between the models, Audio, Video

Bass Boost—Only for RX-6042S: Equalization (5 bands)

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:

Amplifier

Output Power

At Stereo operation Front channels:

At Surround operation Front channels:

Center channel:

Specifications

English

Designs and specifications are subject to change without notice.

100 W*1 per channel, min. RMS, driven into 8 Ω, at 1 kHz with no more than 0.8% total harmonic distortion (IEC268-3/DIN).

100 W per channel, min. RMS, driven into

8 Ω, at 1 kHz with no more than 0.8% total harmonic distortion.

100 W, min. RMS, driven into 8 Ω, at 1 kHz with no more than 0.8% total harmonic distortion.

Surround channels: 100 W per channel, min. RMS, driven into 8 Ω, at 1 kHz with no more than 0.8% total harmonic distortion.

(*1 Measured on AC 110 V, 127 V, 220 V, and 240 V)

Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD:			220 mV/47 kΩ
Audio Input (DIGITAL IN)*2			0.5 V(p-p)/75 Ω
Coaxial	DIGITAL 1	(DVD):
Optical	RX-6042S
	DIGITAL 2	(CD), DIGITAL 3 (TV):
		–21 dBm to –15 dBm (660 nm ±30 nm)

RX-5042S DIGITAL 2 (CD):

–21 dBm to –15 dBm (660 nm ±30 nm)

*2 Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz,

44.1 kHz, 48 kHz)
Recording Output Level
TAPE/CDR, VCR:	220 mV
Signal-to-Noise Ratio (’66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD:	87 dB/62 dB
Frequency Response (8 Ω)
CD, TAPE/CDR, VCR, TV SOUND, DVD:

20 Hz to 50 kHz (+1 dB, –3 dB) +3 dB ±1 dB at 100 Hz

±8 dB (in 2 dB steps)

Main differences between the models

Video
Video Input Sensitivity/Impedance
Composite video
DVD, VCR:					1 V(p-p)/75 Ω
S-video—Only for RX-6042S
DVD, VCR
(Y: luminance):					1 V(p-p)/75 Ω
(C: chrominance, burst):					0.286 V(p-p)/75 Ω
Component—Only for RX-6042S
DVD, VCR					1 V(p-p)/75 Ω
(Y: luminance):
(PB, PR):					0.7 V(p-p)/75 Ω
Video Output Level
Composite video
VCR, MONITOR OUT:					1 V(p-p)/75 Ω
S-video—Only for RX-6042S
VCR, MONITOR OUT
(Y: luminance):					1 V(p-p)/75 Ω
(C: chrominance, burst):					0.286 V(p-p)/75 Ω
Component—Only for RX-6042S
MONITOR OUT
(Y: luminance):					1 V(p-p)/75 Ω
(PB, PR):					0.7 V(p-p)/75 Ω
Synchronization:					Negative
Signal-to-Noise Ratio:					45 dB
FM tuner (IHF)
Tuning Range:		87.50 MHz to 108.00 MHz
Usable Sensitivity		Monaural:		12.8 dBf (1.2 µV/75 Ω)
50 dB Quieting Sensitivity		Monaural:		16.0 dBf (1.7 µV/75 Ω)
		Stereo:	37.5 dBf (20.5 µV/75 Ω)
Stereo Separation at OUT (REC):					35 dB at 1 kHz
AM tuner
Tuning Range:	531 kHz to 1 602 kHz (at 9 kHz intervals)
	530 kHz to 1 600 kHz (at 10 kHz intervals)
General
Power Requirements:	AC 110 V/127 V/220 V/230 V – 240 V ,
	adjustable with the voltage selector,
	50 Hz/60 Hz
Power Consumption
For RX-6042S:					200 W (at operation)
					2 W (in standby mode)
For RX-5042S:					210 W (at operation)
			4.5 W (in standby mode)
Dimensions (W x H x D)
For RX-6042S:		435 mm x 146.5 mm x 409.5 mm
For RX-5042S:		435 mm x 146.5 mm x 369.5 mm
Mass
For RX-6042S:					9.8 kg
For RX-5042S:					8.0 kg
		‡: Equipped			⋅: Not equipped

Models		Output/Input terminals			Sources		Functions
	COMPONENT		S-VIDEO	Analog discrete	DVD MULTI	Bass Boost	Center Tone	AV Compulink
	(IN/OUT)		(IN/OUT)	(DVD MULTI)
RX-6042S	‡		‡	‡	‡	‡	‡	AV COMPULINK-III
RX-5042S	⋅		⋅	⋅	⋅	⋅	⋅	AV COMPULINK

•The remote control supplied with RX-6042S can operate other manufacture’s video equipment, but the one with RX-5042S cannot.

38