Connections

Speaker layout

 

Center speaker

Front left

 

 

Front right

speaker

 

 

speaker

Powered subwoofer

Surround left

 

 

Surround right

speaker

 

 

speaker

 

Wireless receiver unit

NOTE

•Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distance between the speakers and the TV.

•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait

at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•Place the satellite speakers on a flat and level surface.

•Be sure to place the powered subwoofer to the TV’s right. If you place the powered subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

•Do not locate the wireless receiver unit too close to the center unit. Doing so may cause noise over the radio reception.

Connecting a TV

•Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (A pg. 38)

7To connect a TV equipped with the component video input jacks

Center unit

 

TV

COMPONENT VIDEO OUT

 

 

 

 

 

 

 

 

Y

PB

PR

 

 

 

 

 

 

 

 

 

To component video input

Component video cord (not supplied)

NOTE

•If your TV supports progressive video input, you can enjoy a high

quality picture by setting the progressive scan mode to active. (A pg. 19)

•If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

•The component video signals can be output only when you select “DVD” as the source to play. (A pg. 18)

7To connect a TV with the SCART connector

Center unit

TV

AV

To SCART connector*

SCART cable (not supplied)

*Some TV’s SCART connectors output audio signal. In such a case, you can enjoy the TV sound through this system.

NOTE

•No sound signal comes out from “AV” (SCART) connector.

•Select the appropriate scan mode according to your TV. See “Changing the scan mode” (A pg. 19).

13

Page 17 Page 19
Page 18
Image 18
JVC LVT1150-003B manual Speaker layout, Connecting a TV, To connect a TV with the Scart connector
Page 17 Page 19

LVT1150-003B specifications

The JVC LVT1150-003B is a versatile and high-performance speaker designed to enhance your audio experience. Known for its impressive sound quality and robust construction, this speaker has become a popular choice among audio enthusiasts.

At the heart of the LVT1150-003B is its advanced speaker technology. Featuring a high-efficiency design, it ensures maximum output with minimal distortion. The speaker utilizes a 5.25-inch woofer that delivers rich, deep bass, making it ideal for music lovers who crave a powerful low-end response. Additionally, the 1-inch soft dome tweeter offers crisp and clear high frequencies, ensuring a balanced and dynamic sound profile across various music genres.

One of the standout features of the LVT1150-003B is its wide frequency response range, typically spanning from 50 Hz to 20 kHz. This capability allows the speaker to reproduce a broad spectrum of audio content, from thunderous movie explosions to delicate acoustic guitar plucking. With a sensitivity rating of around 87 dB, the speakers can deliver impressive sound levels even with modest amplification, making them suitable for both home theater setups and casual listening environments.

The design of the JVC LVT1150-003B is not only functional but also aesthetically pleasing. Its compact form factor allows it to fit seamlessly into various audio setups, whether in a small apartment or a more extensive home theater system. The speaker is equipped with a durable cabinet that minimizes unwanted resonances, further enhancing audio clarity.

Installation is made easy with versatile connectivity options. The speaker comes with standard binding posts and can be connected to any compatible audio receiver, ensuring a hassle-free setup. This flexibility in connectivity allows users to integrate the LVT1150-003B into a wide range of audio systems, from simple stereo configurations to elaborate multi-channel home theaters.

In summary, the JVC LVT1150-003B is an excellent choice for anyone looking to elevate their audio experience. With its impressive sound quality, advanced technology, and user-friendly design, this speaker delivers exceptional performance across various applications. Whether listening to your favorite music, watching movies, or gaming, the LVT1150-003B ensures an immersive and enjoyable audio experience that meets the demands of modern listeners.
Top Page Image Contents