References

Maintenance

7Handling Discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

•DO NOT use any solvent — such as conventional record cleaner, spray, thinner or benzine — to clean the disc.

7Cleaning the system

•Stains on the system should be wiped off with a soft cloth. If the system is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the system may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following.

•DO NOT wipe it with a hard cloth.

•DO NOT wipe it strong.

•DO NOT wipe it with thinner or benzine.

•DO NOT apply any volatile substance such as insecticides to it.

•DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Power does not come

The power cord and/or system cord is not connected.

Connect the power cord and system cord correctly.

on.

 

(A pg. 14)

 

 

 

The remote control does

The batteries are exhausted.

Replace the batteries. (A pg. 7)

not work.

 

 

Sunlight is falling directly on the remote sensor.

Hide the remote sensor from direct sunlight.

 

 

 

 

No sound.

The system cord and/or speaker cord is not connected.

Check the connection. (A pg. 14)

 

 

 

 

The audio cord is not connected to AUX IN and/or

Connect the cord correctly. (A pg. 14)

 

DIGITAL IN correctly.

 

 

 

 

 

An incorrect source has been selected.

Select the correct source. (A pg. 18)

 

 

 

 

The decode mode is not set correctly.

Select the proper decode mode. (A pg. 36)

 

 

 

No picture is displayed

The video cord is not connected correctly.

Connect the cord correctly. (A pg. 13)

on the TV screen.

 

 

The disc is not playable.

Use a playable disc. (A pg. 3)

 

 

 

 

No picture is displayed

The scan mode is set to “PROGRESSIVE” though the

Change the scan mode to “RGB” or “Y/C”. (A pg. 19)

on the TV screen, the

center unit is connected to the TV which does not

 

picture is blurred, or the

support the progressive video input such as a

 

picture is divided into

conventional TV.

 

two parts.

 

 

 

 

 

Video and audio are

The disc is scratched or dirty.

Replace or clean the disc.

distorted.

 

 

A VCR is connected between the center unit and the

Connect the center unit and TV directly. (A pg. 13)

 

 

TV.

 

 

 

 

The picture does not fit

The monitor type is not set correctly.

Set “MONITOR TYPE” properly. (A pg. 38)

the TV screen.

 

 

 

 

 

Hard to listen to

Antennas are disconnected.

Reconnect the antennas correctly and securely.

broadcast because of

 

(A pg. 8)

noise.

 

 

 

 

 

45

Page 49 Page 51
Page 50
Image 50
JVC LVT1150-003B manual References, Maintenance, Troubleshooting, Handling Discs, Cleaning the system
Page 49 Page 51

LVT1150-003B specifications

The JVC LVT1150-003B is a versatile and high-performance speaker designed to enhance your audio experience. Known for its impressive sound quality and robust construction, this speaker has become a popular choice among audio enthusiasts.

At the heart of the LVT1150-003B is its advanced speaker technology. Featuring a high-efficiency design, it ensures maximum output with minimal distortion. The speaker utilizes a 5.25-inch woofer that delivers rich, deep bass, making it ideal for music lovers who crave a powerful low-end response. Additionally, the 1-inch soft dome tweeter offers crisp and clear high frequencies, ensuring a balanced and dynamic sound profile across various music genres.

One of the standout features of the LVT1150-003B is its wide frequency response range, typically spanning from 50 Hz to 20 kHz. This capability allows the speaker to reproduce a broad spectrum of audio content, from thunderous movie explosions to delicate acoustic guitar plucking. With a sensitivity rating of around 87 dB, the speakers can deliver impressive sound levels even with modest amplification, making them suitable for both home theater setups and casual listening environments.

The design of the JVC LVT1150-003B is not only functional but also aesthetically pleasing. Its compact form factor allows it to fit seamlessly into various audio setups, whether in a small apartment or a more extensive home theater system. The speaker is equipped with a durable cabinet that minimizes unwanted resonances, further enhancing audio clarity.

Installation is made easy with versatile connectivity options. The speaker comes with standard binding posts and can be connected to any compatible audio receiver, ensuring a hassle-free setup. This flexibility in connectivity allows users to integrate the LVT1150-003B into a wide range of audio systems, from simple stereo configurations to elaborate multi-channel home theaters.

In summary, the JVC LVT1150-003B is an excellent choice for anyone looking to elevate their audio experience. With its impressive sound quality, advanced technology, and user-friendly design, this speaker delivers exceptional performance across various applications. Whether listening to your favorite music, watching movies, or gaming, the LVT1150-003B ensures an immersive and enjoyable audio experience that meets the demands of modern listeners.
Top Page Image Contents