JVC LVT1180-004B Using the AC adaptor not supplied, Using dry-cell batteries not supplied

Power Supply Preparations

Basic Play

Other Play Methods

The illustration of the grip band is omitted.

The illustration of the grip band is omitted.

Using the AC adaptor (not supplied)

Intro play

Program play Anti-Shock Protection EX

Using dry-cell batteries (not supplied)

AC power outlet

AC adaptor

Follow the steps in the numerical order.

			Track number in play
		5	0102:53	• Play stops automatically
R	L			when all the tracks have
				been played.

	Elapsed playing time of
HBS	each track

You can successively play the first 10 seconds of every track.

1While stopped,

MODE

(Repeatedly)

You can program up to 24 tracks in any desired order including the same tracks.

1While stopped,

PROGRAM

00 01

This function achieves excellent performance against sound inter- ruption caused by vibrations. You will be able to enjoy listening to music during (not vigorous) jogging.

By utilizing the high-performance servo circuit, audio data will be stored in the memory ahead of time (up to 45 seconds worth). Normally, this function is in effect.

ANTI SHOCK indicator

Two “R6” (LR6) alkaline batteries.

Caution:

3

HOLD

OFF ON

2

Track number to be programmed	Program sequence
00: Not programmed yet.	number

2Select the desired track.

As the audio data is gradually stored, the indicator changes as follows:

Do not forcibly open the battery lid too wide.

[Fully stored]

Battery indicator

Battery indicator

1044:48

DC IN 4.5V

Notes:

Firmly connect			Label side
1	4	6	2
VOLUME		VOLUME

To cancel

Press MODE repeatedly until “INTRO” goes out.

Notes:

• You can also select Intro play during playback.

In this case, Intro play will start from the next track after the

current track has finished.

• You can also select Intro play during Program play mode.

To cancel

A.S.P.

The “ANTI SHOCK” indicator goes out.

This indicator appears when the batteries are almost out of power.	• Even if the unit is turned off, small power is consumed as long
	as the AC adaptor is connected to the AC power outlet.
Power will be cut off a short while later.
	• When you want to purchase the AC adaptor, see page 5.

Random play

To activate again

Press the ASP button.

Note:

Turning off the Anti-Shock Protection EX will save the battery power more or less. For details, see “Anti-shock Protection EX” on page 4.

Operation Button Display/reference

For your reference:

“dISC”

During playback,

Notes:

• During this operation, the disc rotates at a higher rate than usual

in order to collect extra audio data. This may cause the batteries

Tuner Operation

You can listen to FM stations by tuning in manually, automati-

cally, or using preset memory.Presetting stations

Changing the FM reception mode

	During play,
To pause	0700 18
	Press again to restart play.

This indication appears if 3/8 is pressed when no disc is loaded or if the disc is not properly seated.

“– –”

Preparation period before playing the track

Flashes for several seconds after pressing 3/8 to play.

MODE

(Repeatedly)

After playing all tracks, the unit stops.

03 01

e.g. Track number 3

3

PROGRAM

00 02

Next program sequence number

The track is registered.

4Repeat steps 2 and 3.

When you program exceeding 24 tracks, the program se- quence number returns to “01” and will overwrite the previ- ous setting.

to run out faster and could result in a slight increase in disc rota-

tion noise.

• This function can be switched ON and OFF during playback.

However, this may cause a slight interruption in the sound be-

cause the disc’s rotational speed changes.

For best reception, extend the headphone cord (antenna).

You can preset up to 20 stations (frequencies).

When a broadcast is in stereo, “ST.” lights up and you can hear

During play, Total number of tracks

“OPEn”

This indication appears when the lid is open.

To cancel

Press MODE until “RANDOM” goes out, or press 7to stop the disc.

5

Preventing Accidental Operation (Hold mode)

Manual/Auto tuning

1

FM 107.0

2Select a station.

1Select the station you want to preset.

Use Manual or Auto tuning mentioned earlier.

2

PROGRAM

01 107.0

3Select the preset number (01~20) you want.

PRESET UP

stereo effects. However, if an FM stereo broadcast is hard to re- ceive or noisy, you can select monaural (MONO) mode. Recep- tion improves, but you lose the stereo effect.

To select the monaural mode

“MONO” appears.

MODE107.0

To cancel the monaural mode

To stop		1044 48
		Total playing time
While stopped,		No indication
To turn off the
unit
Skip function		• To skip back to the previous track, quickly press 4
During play,	Forward	twice.
		• During Program play, the button is used to fast for-

Removing discs

Turn off the unit and, after the disc has stopped rotating, remove the disc as shown below:

Auto power off

Notes:

•You can also select Random play in stop mode.

•During Program play, you can not select Random play.

Repeat play

You can repeat one track or all tracks.

During playback,

MODE

•To confirm the program

While stopped, press PROGRAM repeatedly. At this time, you can add and change the program, if required.

•To delete the entire program

Turn off the unit.

Hyper-Bass Sound effect

This function causes the unit to ignore, accidental button presses.

Hold mode prevents the following:

•Powering on the unit accidentally (which can cause the batter- ies to go dead).

•Play being cut off unexpectedly.

To use the Hold mode

HOLD

OFF ON

Manual tuning

Press ¢or 4 repeatedly to select a station you want.

Auto tuning

Hold down ¢ or 4 for a while and then release it. The fre- quency automatically changes up or down to find the next station.

08 107.0

PRESET DOWN

Preset number

4Press PROGRAM.

Preset tuning

1

FM87.5

Press MODE once again. “MONO” will go out.

The monaural mode is cancelled also by changing the frequency.

Turning off the unit

•When the unit malfunctions or freezes during use, discon- nect the power source (the AC adaptor and batteries) once. Then, re-connect the power source and continue operation.

•If tuner operation is abnormal, press the RESET switch to reset the unit.

Fast forward/		ward or back through the programmed sequence of
		tracks.
reverse	Reverse
		• During Random play, the skip button cannot be used
		to skip back to tracks that were played previously in
	Search function	the random sequence.
	Keep depressed during play.

If the unit is left in stop mode for 30 seconds, the unit turns itself off automatically to prevent the batteries from running down.

Disc rotation noise

The portable CD player uses a power-saving operation method so that disc rotation noise will intermittently be emitted. But, it is not a failure.

(Repeatedly)

To cancel

Press MODE repeatedly until the repeat indicator goes out.

Notes:

•You can also select Repeat play during Program play.

•You can also select Repeat play while stopped.

You can enjoy powerful bass sound.

HBS

OFF ON

•To prevent the unit from powering on accidentally, set the HOLD switch to the ON position while the unit is turned off.

•To prevent the unit from unexpected operation during play, set the HOLD switch to the ON position after you starts playing the disc.

•When the unit is in Hold mode, ”HOLD” lights as follows. Power on : “HOLD” stays lit.

Power off : “HOLD” lights up for a few seconds when 6 or FM is pressed.

Notes:

•Before turning on the unit, be sure that HOLD is OFF. Otherwise, you cannot turn on the unit.

2 Select the preset number you want.

PRESET UP

08 107.0

PRESET DOWN Preset station

Preset number

(Repeatedly)

2

RESET

Note:

The preset broadcast stations you have made will be cleared by the reset operation.

3 4