Remote
ONLY

Changing the Scanning Mode INFO

This System supports progressive scanning. Select the video signal output according to the type of your TV. If you connect a progressive TV through the COMPONENT VIDEO OUT jacks, you can enjoy a high quality picture playback by selecting “P-SCAN YPBPR.”

Before playback...

(while holding...)

INTERLACE- For a conventional TV.

YUV Select when connecting the TV through the VIDEO OUT jack.

P-SCANFor a progressive TV.

YPBPR Select to enjoy a progressive scanned picture through the COMPONENT VIDEO OUT jacks.

•The PRGR. (Progressive) indicator lights on the display.

Remote

Setting the Clock INFO

ONLY

Without setting the built-in clock, you cannot use Daily Timers (see page 29).

•To exit the clock settings, press CLOCK/TIMER as required.

•To correct a mis-entry during the process, press CANCEL (while holding SHIFT). You can return to the previous step.

1Activate the clock setting mode.

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2Adjust the hour, then the minute.

Now the built-in clock starts working.

To check the current clock time during playback

Ex.: While playing a disc...

*Only while playing back a disc or USB mass storage class device.

**Only while playing back the following discs/files:

MP3/WMA/JPEG/MPEG-1/MPEG-2/DivX files: Group and file number.

DVD Video/DVD-VR:Title and chapter number.

16