~ AM/FM antenna |
| Ÿ Speakers | ||||
To assemble the AM loop antenna |
| • When connecting the speaker cords, match the polarity | ||||
|
| of the speaker terminals: red to (+) and black to | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press and hold
To connect the AM/FM antenna
FM antenna (supplied) | Insert |
| Release |
|
| ||
Extend it so that you can obtain the best |
|
| Red |
reception. |
| R | L |
Black | From right |
| Black | From left |
| speaker | CAUTION: SPEAKER | speaker | |
|
| |||
|
| IMPEDANCE 6 16 |
|
|
White
AM loop antenna (supplied)
Turn it until the best reception is obtained.
•Keep the AM loop antenna cable wrapped around the AM loop antenna frame, otherwise the effectiveness and sensitivity of the AM loop antenna may be reduced.
•DO NOT connect more than one speaker to each terminal.
•DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
!Digital audio component
For better FM reception
FM outdoor antenna (not supplied)
OPTICAL DIGITAL OUT
Protective cap
OPTICAL DIGITAL OUT
Optical digital cord (not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector.
•Set “AUDIO OUT” in the “ ” menu correctly according to the connected digital audio equipment (see page 32).
•The digital signal through the OPTICAL DIGITAL OUT terminal is transmitted only when “DVD/CD” is selected as the source.
5