Installation
CAUTION
To avoid risk of personal injury or product damages, DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. DO NOT lift or carry the door by the handle.
Removing the door must be done by your dealer, or a qualified licensed plumber.
Door Removal |
|
1 | 2 |
Leg Installation
1 | 2 |
| 1 | 1 |
|
| |
|
| 3 |
| 2 |
|
Legs are packed in styrofoam top pack. | Note: It is strongly recommended | |
Note: Legs should be installed near to where | that a pallet or lift jack be used rather than tilting. | |
appliance is to be used, as they are | Raise unit about a foot. Unscrew temporary legs from | |
not secure for long transit. | couplings on all four corners. | |
3 | 4 |
|
Open door completely. Place pins, | Remove hinge trim screws. Take off hinge trim. Identify | Screw legs into couplings on all | Lower range gently to keep any undue strain from |
supplied with unit, in pin hole. For personal safety, | right and left hinge for future | four corners. | legs and internal mounting hardware. |
ONLY use pins supplied with the unit. |
|
|
|
3 | 4 |
Close until pins stop door. | Lift door up and out. |
10 | 11 |
