Anti-tip Device Installation (cont.)
4
1
2
Attach bracket with
mounting hardware provided.
Final Installation
1
Note: Refer to range electrical requirements section for proper installation information.
| Connect electricalin shaded area. See the “Electrical |
| Requirements”section for more information. |
2 | 3 |
Install backguard. | Slide range into place. Be sure |
| bracket slides into the |
4
3 | /8 | ” | ) | |||
cm | ||||||
| 5 |
| ||||
(0. | 9 |
|
| |||
|
|
| ||||
|
|
|
|
|
Check that unit is level side to side
and front to back. The side trim must be 3/8” (0.95 cm) above countertop. If unit is not level repeat steps
18 | 19 |