JVC SP-THBD50W manual HDMI OUT connection, COMPONENT VIDEO OUT connection, Installation and Setup

HDMI OUT connection

•For the 480i resolution setting, real output resolution of HDMI OUT will change to 480p.

•If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

•If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

•The 1080p video output frame rate may be automatically set to either 24Hz or 60Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. (Refer to “1080p Display Mode” on page 22.)

COMPONENT VIDEO OUT connection

•For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COM- PONENT VIDEO OUT will be outputted at 480p resolution.

•Even if the resolution is set to 1080p, non-copy protected BDs and DVDs playback are outputted at 1080i resolution.

•BD or DVD video stream could prevent up-scaling on analogue output.

VIDEO OUT connection

•The resolution of the VIDEO OUT jack is always outputted at 480i resolution.

Installation and Setup

19