JVC SP-THBD50W, LVT2099-029A, SP-THBD50F manual Troubleshooting, Symptom Possible Cause Correction

Troubleshooting

Symptom		Possible Cause		Correction
No power.	•	The power cord is disconnected.	•	Plug the power cord into the wall
				outlet securely.
The power is on, but	•	No disc is inserted.	•	Insert a disc. (Check the disc indica-
the player does not				tor in the display window is lit.)
work.
No picture.	•	The TV is not set to receive DVD	•	Select the appropriate video input
		signal output.		mode on the TV.
	•	The video cable is not connected	•	Connect the video cable securely.
		securely.
	•	The selected resolution is not capa-	•	Select another resolution using
		ble with your TV.		RESOLUTION button.
No sound.	•	The equipment connected with the	•	Select the correct input mode of the
		audio cable is not set to receive disc		audio receiver so you can listen to
		signal output.		the sound from the player.
	•	The power of the equipment connect-	•	Turn on the equipment connected
		ed with the audio cable is turned off.		with the audio cable.
	•	The [AUDIO] options are set to the	•	Set the [AUDIO] options to the cor-
		wrong position.		rect position (see page 23).
	•	The player is in reverse play, fast for-	•	Return to the normal playback.
		ward, slow motion or pause mode.
The player does not	•	The disc is upside down.	•	Insert the disc with the playback side
start playback.				down.
	•	An unplayable disc is inserted.	•	Insert a playable disc. (Check the
				disc type and regional code.)
	•	The rating level is set.	•	Change the rating level.
	•	The disc was recorded on another	•	Finalize the disc on that unit.
		unit and was not finalized.
The Remote Control	•	The Remote Control is not pointed at	•	Point the Remote Control at the
		the remote sensor on the player.		remote sensor of the player.
does not work properly.
	•	The Remote Control is too far from	•	Operate the Remote Control closer to
		the player.		the player.
BD-Live feature does	•	External USB device is not connected.	•	Connect a FAT16 or FAT32 formatted
not work.				USB device to the USB port (see
				page 21).
	•	The connected USB device does not	•	Secure at least 1GB free space in
		have enough space.		the USB device for using BD-Live
				features.
	•	Internet connection is not established.	•	Ensure that the unit is correctly
				connected to the local area network
				and can access the internet (see page
				17).
	•	The [BD-LIVE connection] option in	•	Set the [BD-LIVE connection] option
		the [Setup] menu is set to		to [Permitted].
		[Prohibited].

Reference

43