39
Previous
screen
Press the INPUT Buttons
The input source for picture signals can be changed by
pressing the INPUT Buttons on the projector operating panel
or on the remote control unit.
or
Changing the input signal
INPUT
INPUT
The signal from the source which is
connected to the RGB/YPBPR IN connector
is projected.
This terminal accepts input of RGB input
signals from a personal computer and DTV
Format signals (RGB, YPBPR) from a DVD
or a digital broadcast. No monitor or
projector can automatically decide whether
a Component signal is the RGB-type or the
YPBPR-type. So, you will have to select
either RGB or YPBPR manually.
RGB
YP
B
P
R
S-VIDEO
VIDEO
The signal from the source which is
connected to the S-VIDEO IN connector or
VIDEO IN connector is projected.If cables
are connected to both connectors, the S-
VIDEO signal will be selected
automatically. (The S-VIDEO signal has
priority.) If you would like to project the
VIDEO signals being input to the VIDEO
IN connector, do not connect any cables to
the S-VIDEO IN connector.
(Remote
Control unit)
(LCD Projector)
Continued on the next page...