JVC LX-P1010ZU, LX-P1010ZE Changing the Projection Mode, Press Menu to display the menu

Changing the Projection Mode

The projection mode used by the projector can be changed in accordance with the setting-up position. You may select from two direction types. At the time of shipment from the factory, the projector is set to the “Front” projection mode, but this can be changed if required.

The procedure and on-screen display as shown below are based on RGB as the input signal from a personal computer.

•Selecting procedure

1 Press MENU to display the menu.

2 Press or to select “Function”, and then ENTER to display the screen.

Picture

White Balance

Synchronization

Function

Language

Information

3 Press or to select “Projection Mode”.

4 Press or to select projecting mode.

•Front (Factory setting)

•Rear (Right and Left displays in reverse)

Function

RGB/YPBPR	•RGB •YPBPR
Projection Mode	•Front •Rear
Expansion	•ON	•OFF
On Screen Display	•ON	•OFF
Auto Lamp Off	•YES	•NO

Standard (Push ENTER)

Previous	35
screen