27
1

ENABLE SNAPSHOT SEARCH

Set the Power Dial to “PLAY”.
2

REWIND TAPE

Press REW. Let the tape rewind to the begin-
ning, where it stops automatically.
3

BEGIN SEARCH

Press SNAPSHOT. The camcorder begins
searching for the first scene recorded in
Snapshot mode or where the Strobe effect was
used.
•If the first scene on the tape was recorded in
Snapshot mode or with the Strobe effect, the
camcorder may not be able to locate the
exact beginning of the scene.
Snapshot Search could malfunction if the
recorded tape has:
•Too little time between Snapshots
•Blank space between recordings
•Snapshots taken using Motor Drive mode

To Stop A Snapshot Search In Progress . . .

..... press SNAPSHOT again.
NOTE:

By attaching the camcorder to the Docking Station

and connecting a video printer to the station, it is

possible to print out snapshots.

(

Z

pg. 49).

Snapshot Search
The Snapshot Search function enables you to quickly and easily access scenes recorded in the Snapshot
mode, or scenes where Strobe (Z pg. 41) was used.