75
No. NAME & FUNCTION
THead clog warning
At the start of recording, appears and blinks
if dirt is detected on heads. Stop recording
and clean the heads using the Cleaning
Cassette. (Z pg. 78)
YCondensation warning
When this indicator appears, all functions
are disabled. Turn the unit off for a few
hours, and when you turn it on again the
indicator should disappear.
UClock Battery warning
Appears when the clock (lithium) battery is
not in place or exhausted. For inserting or
replacing the clock battery, refer to page 11.
I“No Tape Loaded” indicator
Appears for 10 seconds after power is turned
on if there's no tape loaded.
—“Tape End” indicator (Z pg. 22)
—An error number (E01, etc.)
appears (Z pg. 71)
Consult your nearest JVC dealer.
—"ERROR: REFER MANUAL" indicator
(Z pg. 65, 66)
Appears when Audio Dubbing or Insert
Editing is impossible.
No. NAME & FUNCTION
tPlayback sound mode display (Z pg. 55)
y“Tape Running” indicator
Cassette mark appears when no tape is
loaded or a tape reaches its end.
uAudio Dubbing/Insert Editing mode
indicator (Z pg. 65, 66)
iDate/Time Display (Z pg. 55)oFast-Forward indication (Z pg. 49)pRewind indication (Z pg. 49)QTime Code Display (Z pg. 55)WPlay/Pause indication (Z pg. 49)
“STILL” is displayed during playback.
EStop indication (Z pg. 49)
LCD Monitor Indications DuringPlayback
TAPE!
25. 12. 9 7

10:35

FFSTOP STILL REW
32kHz / SOUND1 SP
6we
00:00: 00

tUR

u

y

I

Y

i

oQW

pE

No. NAME & FUNCTION
R“Battery Low” indicator
Changes as follows according to the
remaining power level:
When the battery power is coming to an
end, the battery indicator ( ) blinks in the
LCD monitor. After indication blinks, power
turns off automatically. Replace the battery
pack with a fully charged one.
Warning Indications