JVC LYT0002-0N4B Cassette Adapter, Insert Cassette in Adapter, Play Back on Connected VCR

PLAYBACK Using The Cassette AdapterEN 35

Cassette Adapter

+

VCR

Compartment door

Sliding latch

Compact video cassette

Use this to play back a VHS-C video cassette recorded with this camcorder. It is fully compatible with any VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.

INSERT BATTERY

1 Slide the battery cover up to remove it, and install one “R6(AA)” size battery as shown in the illustration to the left. Then reattach the cover.

INSERT CASSETTE IN ADAPTER

2 Slide the latch to open the adapter compartment door, then insert the cassette and close the compartment door.

PLAY BACK ON CONNECTED VCR

3 Load the cassette adapter into the VCR and play the tape back as you would any other.

REMOVE CASSETTE FROM

ADAPTER

4 Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then insert your finger in the hole on the underside of the adapter as shown in the illustration at left, push up and remove the cassette.

NOTES:

	Reels	● During tape loading and unloading, do not touch the
		reels for safety and tape protection.
		● During special-effect playback (slow motion, still
		frame, etc.), the picture may vibrate or noise bars may
		appear on the screen.
		● To record on a VCR using a compact cassette and the
Recording safety hole		adapter, cover the adapter’s recording safety hole with
		adhesive tape.