JVC LYT0002-0N4B specifications Load a Cassette, Enter RECORD-STANDBY Mode, Start Shooting, Power

14EN

RECORDINGBasic Recording

LENS COVER Switch

POWER

Start/Stop button

Power indicator

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 6)

●Tape Length Setting (☞ pg. 10)

●Recording Mode Setting (☞ pg. 10)

●Grip Adjustment (☞ pg. 12)

LOAD A CASSETTE

1 First slide MONITOR OPEN and open the LCD monitor to an angle of over 45 degrees.

Press EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

Shooting while watching the viewfinder

ENTER RECORD–STANDBY MODE

2 Make sure the LCD monitor is closed and locked. Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to

CAMERA.

•The power indicator lights and the camcorder enters the Record–Standby mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Recording Start/Stop button.

•The tally lamp lights while recording is in progress, and “REC ” appears in the viewfinder.

Tally lamp