Samsung MAXDL44RH/ELS Recording a Radio Programme, Copying a Cassette Dubbing, Timer Function

Recording a Radio Programme

B

You can record a radio programme of your choice.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the TUNER function by pressing TUNER .
4	Select the radio station that you wish to record by pressing Tuning

or on the remote control or by press the Tuning Down or Up on the front panel.

5	Press REC/Pause.
	Result: REC is displayed in red and recording starts.
6	When you have finished recording, press the TAPE	on the

remote control or on the front panel to stop recording.

	3
1	6

4 4

5

Copying a Cassette (Dubbing)

You can copy a cassette from Deck 1 to Deck 2. Two options are available:

Normal speed dubbing

High-speed dubbing

You do not need to adjust the volume, as it has no effect on the recording.

Take care not to insert the tape to be copied in Deck 2, as it will be erased when you start recording.

1	Switch your system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Insert the tape to be copied in Deck 1.
4
	To copy a cassette at...	Press...
	Normal speed	Normal
	High speed	High

Result: The appropriate indications are displayed and the cassette in Deck 1 is copied to the cassette in Deck 2.

5 Press on the front panel or TAPE on the remote control when you have finished recording.

1	5
	4
	4

Selecting the Cassette Playback

Mode (Deck 2 Only)

Your mini-compact system has three cassette playback modes which enable you to listen to both sides of a cassette auto- matically.

Press REV. Mode until the appropriate symbol is displayed.

When the display indicates... The mini-compact system plays back...

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

Timer Function

The timer enables you to switch the system on or off at spe-

cific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto- matically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing On/Standby.
2	Press Timer/Clock until	TIMER is displayed.
3	Press Enter.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

a Set the hour by tuning the Multi Jog knob to the right or to the left.

b Press Enter.

Result: The minutes flash.

c Set the minutes by tuning the Multi Jog knob to the right or to the left.

d Press Enter.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by tuning the Multi Jog knob to the right or to the left.

bPress Enter.

Result: The minutes flash.

cSet the minutes by tuning the Multi Jog knob to the right or to the left.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6 Press Tuning Down and Up to adjust the volume level and press

Enter.

Result: The source to be selected is displayed.

7 Turn the Multi Jog knob to select the source to be played when the system switches on.

If you select...	You must also...
TAPE (cassette)	Insert a recorded cassette in one of the
	decks before setting the system to standby.
TUNER (radio)	a Press Enter.
	b Select a preset station by tuning the
	Multi Jog knob to the right or to the left.
CD (compact disc)	Load one or more compact discs.

8	Press Enter to confirm the timer.
9	Press On/Standby to set the system to standby mode.
	Result:	is displayed to the bottom left of the time, indicating that

the timer has been set. The system will switch on and off automatically at the required times.

If the timer switch on and off times are identical, the word ERROR is displayed.

GB

1,9	6	6
	2	3,4,5,6,7,8
		4,5,7

To set the timer function

You may use Multi Jog or / buttons to adjust in step 4,5,6,7.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press Timer On...
Cancel the timer	Once.
	Result:	is no longer displayed.
Restart the timer	Twice.
	Result:	is displayed again.

28 29