JVC LYT0002-0S4A manual Dubbing, 58EN EDITING, Make Connections, Start Playback, Start Recording

END RECORDING

Press the Stop button (5) to stop the source tape, and engage the VCR’s stop mode.

58EN EDITING

Dubbing

You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual for details.

PLAY button

STOP button

VCR (Recording deck)

	MENU
Play button	IND.ON/OFF
Stop button	button

Power Dial

	M
A	5S
OFFY
A
L
P

T W

DISPLAY

PLAY

RM-V711U STOP (provided)

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR as shown in the illustration on pages 56, 57. Please also refer to your VCR's instruction manual before dubbing.

2 START PLAYBACK

Press the Play button (4) to play back the source tape.

3 START RECORDING

While watching on the connected TV, engage your VCR’s record mode from the spot on the source tape you want to begin recording.

4 PAUSE RECORDING

Engage your VCR’s pause mode to stop recording a segment.

5

NOTES:

●You can use Playback Zoom (☞ pg. 50) or Playback Effects (☞ pg. 51) in step 2.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do appear during dubbing, they are being recorded onto the new tape.

To clear the Playback Sound Mode Display, press DISPLAY on the RM-V711U Remote Control.

●Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 52) to show or hide the Date/Time and the Time Code on the recording.

●To show or hide all indications, press the IND.ON/OFF button on the camcorder for longer than 1 second.