JVC LYT0002-0S4A manual Picture Wipe function doesn’t work

EN 69

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

19.The Picture Wipe and Dissolve functions don’t work.

19.•The last selected editing scene is ending.

•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.

•The power is off.

19.•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically

activated (☞ pg. 38). •Do not turn off the

camcorder’s power after setting Edit-In and Edit-Out points, as they will all be erased (☞ pg. 38).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within

5 minutes after engaging Record-Standby mode (☞ pg. 38).

20.The Picture Wipe function doesn’t work.

20.•The Slow (Slow Shutter) effect is activated.

•The Squeeze or Cinema mode is selected in the Recording Menu.

20.•Make sure the Squeeze mode, Cinema mode, or Slow effect is not activated when preparing to use the

Picture Wipe function (☞ pg. 31, 43).

21.Even when Slow (Slow Shutter) isn't selected, the image looks like it is activated.

21.•When shooting in the dark with GAIN UP set to A, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow (Slow Shutter).

21.•If you want the lighting to look more natural, set GAIN UP to “AGC” or

“OFF” in the Recording Menu (☞ pg. 32).

22.The Video Echo effect doesn’t work.

22.•The Picture Wipe or Dissolve functions are in use.

•The Squeeze mode is selected in the Recording Menu.

•Snapshot Dissolve is in progress.

•A Fade-In or Fade-Out is in progress (White Fader, Black Fader or Black & White Fader).

22.•Make sure the Squeeze mode is set to “OFF”

(☞ pg. 31).

•Do not try to use the Video Echo effect during a Fade-In or Fade-Out

(☞ pg. 36).

23. There is no strobe when	23. •The Picture Wipe or	23. •Do not try to use the
the Classic Film and	Dissolve functions are in	Classic Film or Strobe
Strobe effects are	use.	effects during a scene
activated.	•Snapshot Dissolve is in	transition (☞ pg. 43).
	progress.
24. White Balance cannot be	24. •The Sepia or Monotone	24. •Turn off Sepia or Monotone
activated.	effects are activated.	before setting White
	•Snapshot Dissolve is in	Balance (☞ pg. 42).
	progress.	•Wait until the Snapshot
		Dissolve is finished before
		setting White Balance
		(☞ pg. 25).
		CONTINUED ON NEXT PAGE