JVC LYT0060-001B Distortion may occur at start of playback. This is normal., Noise may appear during Retake. This is normal., The Fader (, pg. 20) cannot be activated by pressing 5SEC. REC.

EN 15
FEATURE: Quick Review
PURPOSE: To check the end of the last
recording.
OPERATION: 1)Press “ ” and release quickly
during the Record-Standby mode.
nTape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
NOTE: Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1)Make sure the camcorder is in the
Record-Standby mode.
2)Press either RETAKE button to
reach the start point for new
recording. Pressing “F” forwards
the tape and pressing “R” reverses
it.
3)Press Recording Start/Stop Button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
FEATURE: 5Sec. Rec (5-sec. Recording)
PURPOSE: To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
OPERATION: 1)During Record-Standby, press
5SEC. REC. “ 5S” appears and
5Sec. Rec is reserved.
2)Press Recording Start/Stop Button.
Recording starts, and after
5-second recording is finished, the
camcorder reenters the Record-
Standby mode automatically.
nTo cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that “ 5S” disappears.
NOTE:
The Fader ( Z pg. 20) cannot be
activated by pressing 5SEC. REC.
5S
PAUSE
Viewfinder
5Sec. Rec mode indicator
RETAKE (R/F)
5SEC. REC