TROUBLESHOOTING
EN
69
SYMPTOM
POWER
No power is supplied.
The power suddenly goes off and doesn’t come back on by itself.
OTHER
POSSIBLE CAUSE(S)
●The battery pack has not been attached correctly (☞ pg. 6).
●The battery pack is not charged (☞ pg. 6).
●The power supply has not been correctly connected (☞ pg. 7).
●The battery pack has completely discharged.
●Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesn’t come on, consult your nearest JVC dealer.
Some functions are not available.
Vertical white lines appear when shooting a very bright object.
Bright, crystal-shaped spots appear in the viewfinder.
The viewfinder and the lens have become dirty (ex. fingerprints).
An error number (i.e. E03) appears.
The image is out of focus.
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks.
●The Select Dial is set to “AUTO LOCK”.
●This sometimes occurs when the contrast between the background and the object is great. It is not a defect of the camcorder.
●Sunlight is directly entering the lens. This is not a defect of the camcorder.
●Wipe them gently with soft cloth.
●Turn the camcorder’s power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears, consult your nearest JVC dealer.
●The dioptre needs to be adjusted (☞ pg. 10).
●The scene being shot is adversely affecting the operation of Auto Focus (☞ pg. 32).
●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
The camcorder is a
