EN 65

1 3 2
IN OUT IN OUT IN OUT
Original tape (camcorder)
Edited tape (VCR)

AUTOMATIC EDITING TO VCR

ENGAGE VCR’S RECORD-PAUSEMODE
1
Point the remote control towards the VCR’s infrared
sensor and press VCR REC STBY, or manually
engage the VCR’s Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press the MENU Jog Dial on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
While editing, the R.A. Edit counter of the scene
which is beging copied is shown with a blinking
highlight.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
●
If you performed step 1
C
on page 63 (“MAKE
CONNECTIONS”), keep the remote control pointed at the
VCR during editing.
●
The on-screen display only appears while the camcorder
searches for each scene.
●
There may be noise at in- or out-points on the edited tape
with certain VCRs.
STOP
MENU
Jog Dial
ON/OFF
VCR REC STBY
RM-V709U
(provided)

SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL

Using the RM-V709U, it is also possible to perform deck-to-deck
Random Assemble Editing. The playback deck must be an R.A. Edit-
capable JVC VCR. The recording deck can be...
na VCR other than JVC, or
na JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT
connector

How to use:

— Connect the playback deck and RM-V709U as shown on the
left.
— Set the RM-709U to correspond to the brand of the recording
deck. (Z pg. 62)
— For Random Assemble Editing procedure, please refer to the
instruction manual of the JVC VCR you are using as the
playback deck.

Notes:

nRM-V709U cannot be used to control the playback deck.
nRM-V709U is capable of controlling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
nTo put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
To
PAUSE IN
Player (JVC VCR) AV OUT
Recording deck
To
R.A. EDIT Editing cable
(provided)
AV IN
RM-V709U
(provided)