22
EN
RECORDING
Basic
Recording
(Cont.)
Tape Remaining Indicator
The time remaining on the tape is automatically monitored and displayed (☞ pg. 79). When the tape ends, “TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining time reaches 2 minutes.
Display
90 min
REC
89 min 
3 min 
2 min
blinking
0 min 
1 min
blinking blinking
BRIGHT | – – – – |
IND. ON/OFF button
Select Dial
Brightness Control
You can adjust the brightness of the display by rotating the Select Dial.
LCD Monitor/Viewfinder Indications
You can make the LCD monitor/Viewfinder indications appear/disappear.
1 ADJUST BRIGHTNESS
Rotate the Select Dial until the brightness indicator moves and the display reaches its appropriate brightness.
•The brightness indication appears on the display.
1 PRESS IND.ON/OFF BUTTON When you do not want the indications to appear, press the IND.ON/OFF button for longer than approximately 1 second. Certain indications disappear.
Press again for longer than approx. 1 second to make the indicaitons reappear.
NOTE:
It is impossible to make the tape running indicator and warnings etc. disappear from the LCD monitor or the viewfinder. For the indications that can be removed, ☞ pg. 79.
