JVC LYT0201-001A manual Picture Wipe/Dissolve, Resume Recording, P and P of the Fader/Wipe Menu

EN37

Picture Wipe/Dissolve

Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture Wipe effects and 1 Dissolve effect. Select the Picture Wipe effect at the Fader/Wipe Menu (☞ pg. 35).

Select any one effect from P,

P, P,

P , P, P and P of the Fader/Wipe Menu.

Previous scene end Example

P WIPE – SCROLL

The next scene gradually wipes in over the previous scene.

Within 5 minutes . . .

5S
M	OFF
A

YALP

START/STOP button

Wipe In

1 START RECORDING

Press START/STOP.

2 ENGAGE RECORD-STANDBY MODE Press START/STOP when one scene is finished. The point at which the scene ended is stored in memory.

3 RESUME RECORDING

If you start recording a new scene within 5 minutes of the end of the previous recording (without having turned the camcorder’s power off), the previous scene wipes out, revealing the new scene.

NOTES:

●If the power is turned off after a scene is finished recording, the stored point is erased.

This disables the Picture Wipe/Dissolve combination. When this happens, the Picture Wipe/Dissolve indicator blinks. Try recording again, but don’t turn the power off when you’re finished. Please be advised that power also shuts off automatically if 5 minutes elapse in the Record-Standby mode.

●The sound at the end of the last recorded scene is not stored.