EN37
START/STOP
INT. TIME
REC. TIME
ZOOM (T/W)
PLAY
STOP
1
1
M
/
I
2
N
S
Interval time
indicator
Recording time
indicator
Remote sensor
RM-V700U
(optional)
OR
RM-V715U
Remote sensor Playback Zoom
To magnify the recorded image up to 10X at any time
during playback.
NOTES:
●
Use the RM-V715U remote control unit to perform this
procedure.
●
Make sure that the TBC mode is activated (

墌

pg. 31).
1)Press PLAY to find the scene of interest.
2)Press the ZOOM Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder’s remote sensor. Pressing T zooms in.

To End Zoom . . .

.... press and hold W until magnification returns to
normal. Or, press STOP and then press PLAY.
NOTES:
●

Zoom can also be used during still playback.

●

Due to digital image processing, the quality of the image

may suffer.

●

After zooming in on a still video image, when normal

playback is started, the zoomed-in effect is momentarily

cancelled but then resumes, returning magnification to

the previously set level.

Animation and Time-Lapse
The remote control lets you set/release Interval Time and
Recording Time without using the Menu Screen.

Animation

1)Set
Instead of performing steps 1 and 2 on pg. 26
(“Animation”), press REC TIME on the remote control.
Each time REC TIME is pressed, the Recording Time
indicator appears, changing in the following order:
1/4S, 1/2S, 1S, 5S and no indication (off).
2)Release
Instead of using the Menu in step 5 on pg. 26, press
REC TIME on the remote control until the Recording
Time indicator disappears.

Time-Lapse

1)Set
Instead of performing steps 1 and 2 on pg. 26 (“Time-
Lapse”), press REC TIME and INT. TIME on the remote
control. Each time REC TIME is pressed, the Recording
Time indicator appears, changing in the following
order: 1/4S, 1/2S, 1S, 5S and no indication (off). Each
time INT. TIME is pressed, the Interval Time indicator
appears, changing in the following order: 15S, 30S,
1MIN, 5MIN and no indication (off).
2)Release
Instead of using the Menu in step 4 on pg. 26 (“Time-
Lapse”), press REC TIME and INT. TIME on the remote
control until the indicators disappear.
NOTE:

Also refer to pg. 26.

RM-V715U
Display