EN
21
NOTES:
●It is recommended to use the AC Adapter as the
power supply instead of the battery pack (墌 pg. 9).
●The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter reduces
interference.
●To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder’s Power
Switch to “” or “ ”, then set your TV to the
appropriate input mode.
●Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when
the camcorder is turned on.
●If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
●While the Audio/Video cable is connected to the AV
connector, sound cannot be heard from the speaker.
1Make sure all units are turned off.
2Connect the camcorder to a TV or VCR as shown
in the illustration (墌 pg. 20).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3Connect the VCR output to the TV input, referring
to your VCR’s instruction manual.
4Turn on the camcorder, the VCR and the TV.
5Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.....set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen (墌 pg. 36).
•Time Code
.....set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (墌 pg. 36).
•Playback Sound Mode, Tape Speed And Tape
Running Displays for tape playback
.....set “ON SCREEN” to “LCD” or “LCD/TV” in the
Menu Screen (墌 pg. 36).